MakerFocus 3.7V 3700mAh Lipo Rechargeable Battery – 2 Pcs 1S Lithium Polymer Battery 3.7 Volt Lipo Batteries LP103395…
Make sure this fits by entering your model number.
Parameter: Voltage: 3.7V; plug: JST 2.0A; rated capacity: 3700mAh; dimensions: 11*5*2.5cm; weight: 148g
Widely Application: 1s lipo is suitable for remote control cars, sirens, bluetooth speakers, robots, digital cameras, keyboard and mouse, e-books, toys, etc. Please note that you should confirm your device battery dimension and connector plug is same as lipo battery
$18.99
Speciation: Rated Capacity: 3700mAh
Rated Voltage: 3.7 V
Storage Temperature: -20~+25°C
Standard Charging Current: 0.2C (740mA)
Maximum Charging Voltage: 4.200±0.020V
Standard Discharge Current: 0.2C (740mA)
Cut-Off Voltage: 2.750±0.005 V
Charging Temperature: 0~45°C
Discharge Temperature: -20~+60°C
Warm Reminder:
1. Charging current should be less than maximum 0.74A.Charging with higher current than recommended value may cause damage to cell electrical, mechanical and safety performance and could lead to heat generation or leakage.
2. Charging shall be done by voltage less than 4.20V/cell. Charging beyond 4.20V, which is the absolute maximum voltage, must be strictly prohibited.
The charger shall be designed to comply with this condition. It is very dangerous that charging with higher voltage than maximum voltage may cause damage to the cell electrical, mechanical safety performance and could lead to heat generation or leakage.
3. The cell shall be charged within 10℃~45 ℃.
4. Reverse charging is prohibited. The cell shall be connected correctly. The polarity has to be confirmed before wiring. In case of the cell is connected improperly, the cell cannot be charged.
Simultaneously, the reverse charging may cause damaging to the cell which may lead to degradation of cell performance and damage the cell safety, and could cause heat generation or leakage.
Package Content: 2 Pieces 103395 battery
Make sure this fits by entering your model number.
Parameter: Voltage: 3.7V; plug: JST 2.0A; rated capacity: 3700mAh; dimensions: 11*5*2.5cm; weight: 148g
Widely Application: 1s lipo is suitable for remote control cars, sirens, bluetooth speakers, robots, digital cameras, keyboard and mouse, e-books, toys, etc. Please note that you should confirm your device battery dimension and connector plug is same as lipo battery
Reliable Performance: No risk of leaking, long cycle life, no memory effcet. Battery capacity is not less than 80% of the rated capacity after 500 times of continuous charging and discharging. Reliable quality, you can use 3.7v lipo battery for a long period of time, no worrying about quality issues
More Safety: Built-in integrated protective board which has overcharge, overdischarge, overcurrent, short circuit, overvoltage, overheating, overpower, anti-static protection. Guarantee the safety when charging or discharging 3.7v rechargeable batteries
Warm Reminder: When charging, please observe the following guidelines for your safety. 1. Charging current should be less than maximum 0.74A; 2. Charging voltage should be less than 4.20V; 3. Charging temperature within 10℃~45 ℃; 4.Reverse charging is prohibited
Specification: MakerFocus 3.7V 3700mAh Lipo Rechargeable Battery – 2 Pcs 1S Lithium Polymer Battery 3.7 Volt Lipo Batteries LP103395…
|
User Reviews
Be the first to review “MakerFocus 3.7V 3700mAh Lipo Rechargeable Battery – 2 Pcs 1S Lithium Polymer Battery 3.7 Volt Lipo Batteries LP103395…”
$18.99
There are no reviews yet.